PAS-PPS

Homepage / Semi-finished products & finished parts / Material finder / PAS-PPS

mechanical characteristics

Characteristic Standard Unit Value
Yield stress (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 102
Yield strain (dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		% 3.5
Ten­sile strength (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 102
Elon­ga­tion at break (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		% 12
Ten­sile E-mod­u­lus (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 4000
Max. per­mis­si­ble pres­sure load (con­tin­u­ous) Faigle MPa (N/mm²) 22
Charpy notched im­pact strength (+23°C, dry) ISO 179/1eA kJ/m² 2

thermal characteristics

Characteristic Standard Unit Value
min. Op­er­at­ing tem­per­a­ture (con­tin­u­ous) °C -20
max. ser­vice tem­per­a­ture (con­tin­u­ous) °C 220
max. ser­vice tem­per­a­ture (short-term) °C 260
Heat de­flec­tion tem­per­a­ture HDT/A (1.8 N/mm²) ISO 75-1/-2
DIN 53461
ASTM D 648 		°C 115
Co­ef­fi­cient of lin­ear ther­mal ex­pan­sion (23 - 60°C) ISO 11359 10^-6/K 50
Ther­mal con­duc­tiv­i­ty (+23°C) DIN 52612 W/(m×K) 0.3

combustibility characteristics

Characteristic Standard Unit Value
UL94 flamma­bil­i­ty IEC 60695-11-10 class V0

electrical characteristics

Characteristic Standard Unit Value
Di­elec­tric con­stant, rel­a­tive per­mit­tiv­i­ty (1 MHz, dry) DIN IEC 60250
(DIN VDE 0303-4)
ASTM D 150 		3
Di­elec­tric loss fac­tor (1 MHz, dry) DIN IEC 60250
(DIN VDE 0303-4)
ASTM D 150 		0.002
Sur­face re­sis­tiv­i­ty (dry) DIN IEC 60093
(DIN VDE 0303-30)
ASTM D 257 		Ω 10^13

physical characteristics

Characteristic Standard Unit Value
Den­si­ty, Gross den­si­ty ISO 1183
DIN 53479
ASTM D 792 		g/cm³ 1.35
Mois­ture ab­sorp­tion at sat­u­ra­tion - stan­dard cli­mate (23°C, 50% RF) ISO 62 ISO 1110 % 0.02
Water ab­sorp­tion at sat­u­ra­tion (water stor­age 23°C) ISO 62
DIN 53495
ASTM D 570 		% 0.1
Download datasheet
qrcode

Scan WeChat QR code