PAS-PC FR(vormals / formerly PAS-PC-F)
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Yield stress (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 63 |
| Yield strain (dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 6 |
| Tensile strength (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 60 |
| Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 100 |
| Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 2300 |
| Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 15 |
thermal characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| min. Operating temperature (continuous) | °C | - 50 | |
| max. service temperature (continuous) | °C | 120 | |
| max. service temperature (short-term) | °C | 140 | |
| Heat deflection temperature HDT/A (1.8 N/mm²) |
ISO 75-1/-2 DIN 53461 ASTM D 648 |
°C | 127 |
| Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.2 |
combustibility characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| UL94 flammability | IEC 60695-11-10 | class | V0 |
electrical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
2.9 | |
| Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.01 | |
| Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^15 |
physical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.2 |
chemical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| UV light and weathering | unstable | ||
| Physiology | Faigle | unsuitable |