PAS-ETFE

Homepage / Semi-finished products & finished parts / Material finder / PAS-ETFE

mechanical characteristics

Characteristic Standard Unit Value
Yield stress (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 22
Ten­sile strength (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 43
Ten­sile E-mod­u­lus (+23°C, dry) ISO 527-1/-2
DIN 53455
ASTM D 638 		MPa (N/mm²) 800
Max. per­mis­si­ble pres­sure load (con­tin­u­ous) Faigle MPa (N/mm²) 11
Charpy notched im­pact strength (+23°C, dry) ISO 179
DIN 53453 		kJ/m² No Break
Charpy im­pact strength (+23°C, dry) ISO 179
DIN 53453 		kJ/m² No Break
Ball in­den­ta­tion hard­ness (dry) ISO 2039-1 MPa (N/mm²) 32
Co­ef­fi­cient of slid­ing fric­tion (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hard­ened and ground, dry) 0.4

thermal characteristics

Characteristic Standard Unit Value
min. Op­er­at­ing tem­per­a­ture (con­tin­u­ous) °C -200
max. ser­vice tem­per­a­ture (con­tin­u­ous) °C 150
max. ser­vice tem­per­a­ture (short-term) °C 200
Heat de­flec­tion tem­per­a­ture HDT/A (1.8 N/mm²) ISO 75-1/-2
DIN 53461
ASTM D 648 		°C 71

combustibility characteristics

Characteristic Standard Unit Value
UL94 flamma­bil­i­ty IEC 60695-11-10 class V0

electrical characteristics

Characteristic Standard Unit Value
Sur­face re­sis­tiv­i­ty (dry) DIN IEC 60093
(DIN VDE 0303-30)
ASTM D 257 		Ω 10^17

physical characteristics

Characteristic Standard Unit Value
Den­si­ty, Gross den­si­ty ISO 1183
DIN 53479
ASTM D 792 		g/cm³ 1.75

chemical characteristics

Characteristic Standard Unit Value
UV light and weath­er­ing constant
Phys­i­ol­o­gy Faigle suitable
Download datasheet
qrcode

Scan WeChat QR code