PAS-C60 (vormals / formerly IGOPAS-C6/100)
mechanical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Yield stress (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 80 |
| Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 3100 |
| Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 14 |
| Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 4 |
| Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | No Break / No Break |
| Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 160 |
| Coefficient of sliding friction (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hardened and ground, dry) | 0.39 |
thermal characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| min. Operating temperature (continuous) | °C | -40 | |
| max. service temperature (continuous) | °C | 105 | |
| max. service temperature (short-term) | °C | 170 | |
| Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 80 |
| Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.23 |
combustibility characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^13 |
physical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.15 |
| Water absorption at saturation (water storage 23°C) |
ISO 62 DIN 53495 ASTM D 570 |
% | 6.5 |