PAS-60 GK50
mechanical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Tensile stress at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 85 |
| Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 3 |
| Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 6000 |
| Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 6 |
| Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 60 |
| Coefficient of sliding friction (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hardened and ground, dry) | 0.3 |
thermal characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| min. Operating temperature (continuous) | °C | -30 | |
| max. service temperature (continuous) | °C | 100 | |
| max. service temperature (short-term) | °C | 180 | |
| Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 70 |
electrical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
3.8 | |
| Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.022 | |
| Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^13 |
physical characteristics
| Characteristic | Standard | Unit | Value |
|---|---|---|---|
| Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.52 |