PAS-PTFE rein (pure)
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Yield stress (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 10 |
Tensile strength (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 20 |
Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 200 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 750 |
Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 2 |
Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | No Break |
Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 16 |
Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 25 |
Coefficient of sliding friction (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hardened and ground, dry) | 0.07 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
min. Operating temperature (continuous) | °C | -200 | |
max. service temperature (continuous) | °C | 260 | |
Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 130 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | V0 |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^17 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 2.15 |
chemical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UV light and weathering | constant | ||
Physiology | Faigle | suitable |