PAS-PMMA XT Fluor
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Tensile stress at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 83 |
Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 4.5 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 3200 |
Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 20 |
Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 15 |
Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 1.6 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
min. Operating temperature (continuous) | °C | -40 | |
max. service temperature (continuous) | °C | 70 | |
max. service temperature (short-term) | °C | 95 | |
Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 80 |
Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.19 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^13 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.19 |
Moisture absorption at saturation - standard climate (23°C, 50% RF) | ISO 62 ISO 1110 | % | 0.6 |
chemical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Physiology | Faigle | unsuitable |