PAS-PMMA XT
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Tensile strength (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 70 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 3200 |
Charpy notched impact strength (+23°C, dry) | ISO 179/1eA | kJ/m² | 2 |
Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 235 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
max. service temperature (continuous) | °C | 70 | |
max. service temperature (short-term) | °C | 90 | |
Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.18 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
2.70 | |
Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.02 | |
Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^15 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.19 |
chemical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UV light and weathering | constant | ||
Physiology | Faigle | suitable |