PAS-C120 (vormals / formerly IGOPAS-L12/100)
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Yield strain (dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 7 |
Tensile strength (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 66 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 2200 |
Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 12 |
Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 110 |
Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 8 |
Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 106 |
Coefficient of sliding friction (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hardened and ground, dry) | 0.40 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
min. Operating temperature (continuous) | °C | -50 | |
max. service temperature (continuous) | °C | 120 | |
max. service temperature (short-term) | °C | 150 | |
Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 100 |
Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.23 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^13 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1,03 |
Moisture absorption at saturation - standard climate (23°C, 50% RF) | ISO 62 ISO 1110 | % | 1.1 |
chemical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UV light and weathering | conditionally stable |