PAS-60 GF50
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Tensile stress at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 235 |
Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 3 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 16000 |
Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 100 |
Charpy notched impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | 22 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Heat deflection temperature HDT/A (1.8 N/mm²) |
ISO 75-1/-2 DIN 53461 ASTM D 648 |
°C | 215 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
4.2 | |
Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.014 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.55 |
Moisture absorption at saturation - standard climate (23°C, 50% RF) | ISO 62 ISO 1110 | % | 1.5 |
Water absorption at saturation (water storage 23°C) |
ISO 62 DIN 53495 ASTM D 570 |
% | 4.8 |