PAS-46
To make contact
Hello, I am Ana Markota-Oswald,
I´ll be pleased to help you
mechanical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Yield stress (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 105 |
Yield strain (dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 18 |
Tensile strength (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 105 |
Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 25 |
Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 3400 |
Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 13 |
Charpy notched impact strength (+23°C, dry) | ISO 179/1eA | kJ/m² | 8 |
Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 165 |
Coefficient of sliding friction (p = 0.3N/mm² / 0.6N/mm², v = 0.27m/s, against steel hardened and ground, dry) | 0.32 |
thermal characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
min. Operating temperature (continuous) | °C | -40 | |
max. service temperature (continuous) | °C | 130 | |
max. service temperature (short-term) | °C | 200 | |
Heat deflection temperature HDT/A (1.8 N/mm²) |
ISO 75-1/-2 DIN 53461 ASTM D 648 |
°C | 160 |
Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 80 |
Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.3 |
combustibility characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
UL94 flammability | IEC 60695-11-10 | class | HB |
electrical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
3.4 | |
Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.019 | |
Surface resistivity (dry) |
DIN IEC 60093 (DIN VDE 0303-30) ASTM D 257 |
Ω | 10^13 |
physical characteristics
Characteristic | Standard | Unit | Value |
---|---|---|---|
Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.19 |
Moisture absorption at saturation - standard climate (23°C, 50% RF) | ISO 62 ISO 1110 | % | 3.7 |
Water absorption at saturation (water storage 23°C) |
ISO 62 DIN 53495 ASTM D 570 |
% | 9.5 |