PAS-80 Mo
mechanical characteristics
| 特征 | 标准 | 单元 | 数值 |
|---|---|---|---|
| Yield stress (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 58 |
| Elongation at break (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
% | 160 |
| Tensile E-modulus (+23°C, dry) |
ISO 527-1/-2 DIN 53455 ASTM D 638 |
MPa (N/mm²) | 1800 |
| Max. permissible pressure load (continuous) | Faigle | MPa (N/mm²) | 13 |
| Charpy impact strength (+23°C, dry) |
ISO 179 DIN 53453 |
kJ/m² | No Break |
| Ball indentation hardness (dry) | ISO 2039-1 | MPa (N/mm²) | 100 |
thermal characteristics
| 特征 | 标准 | 单元 | 数值 |
|---|---|---|---|
| min. Operating temperature (continuous) | °C | -30 | |
| max. service temperature (continuous) | °C | 92 | |
| max. service temperature (short-term) | °C | 160 | |
| Coefficient of linear thermal expansion (23 - 60°C) | ISO 11359 | 10^-6/K | 80 |
| Thermal conductivity (+23°C) | DIN 52612 | W/(m×K) | 0.26 |
combustibility characteristics
| 特征 | 标准 | 单元 | 数值 |
|---|---|---|---|
| UL94 flammability | IEC 60695-11-10 | class | V2 |
electrical characteristics
| 特征 | 标准 | 单元 | 数值 |
|---|---|---|---|
| Dielectric constant, relative permittivity (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
8 | |
| Dielectric loss factor (1 MHz, dry) |
DIN IEC 60250 (DIN VDE 0303-4) ASTM D 150 |
0.06 |
physical characteristics
| 特征 | 标准 | 单元 | 数值 |
|---|---|---|---|
| Density, Gross density |
ISO 1183 DIN 53479 ASTM D 792 |
g/cm³ | 1.14 |
| Water absorption at saturation (water storage 23°C) |
ISO 62 DIN 53495 ASTM D 570 |
% | 8.4 |